The Five-axis four linkage water jet cutting machine is the achievements in scientific research of All-Powerful in 2008.It is the first achievement in China and exceeded the same level product of the world. The five-axis four linkage water jet is also five-axis structure, one is manual control angle axis, this axis doesn’t attend the linkage, the other is rotation axis, with theoriginal three-axis,all of which we define as five-axis four linkage water jet cutting machine. This water jet cutting machine has some limit compared with five-axis cutting, its tilt angle is smaller and the max tilt angle is 4 degree, but it can solve the problem of tilt cutting. By the feed of angle during cutting, the cutting curf will be completely vertical. At the same time, the distance between cutting head and material can be adjusted automatically by the auto height inspection system, which can decrease the difference of labor setting tool. The height positioning accuracy is 0.01mm and the whole cutting accuracy is 0.1mm,which can meet various cutting requirement. This cutting equipment has got good result in many cutting field, and mainly reflects the sharp drop in processing cost and significantly improve the processing efficiency.
There is a more delightful result in marble pattern cutting. When the tilt angle of cutting head is the biggest 4 degree, the kerfs section will change a lot. When two pieces of cutting parts are matching together, the top surfaces have no aperture but the one of bottom surfaces is big. In this way the twice polishing producer by manual will be saved, which reduces the processing cost and enhances the working efficiency. The quality of marble pattern has had a great increase and the making of pattern has no longer been a very difficult technology at the same time. If only you had a four-axis dynamic waterjet marble pattern cutting machine, the complex marble pattern production would soon come true.
And it also has good result in cutting glass vertical hole, for instance, when you want to cut some hole in glass panel, it don’t need to lower the cutting speed. Without changing the procesing speed, it can achieve the expected effect. The benefit is very clear.
of processing big amount parts